Livos 611 - Natural Floor Varnish (TUNNA)

Range of application

For interior use, for a transparent varnishing of all timber floors and furniture. Not to be used on cork.

Technical qualities

Glossy, transparent, slightly honey-toned. According to DIN 53 160 saliva and sweat resistant. According to DIN EN 71, part 3 suitable for toys. Free of organic-chemical compounds according to DIN EN 71, part 9. Results in a dirt-repellent, abrasion- and scratch-resistant paint film, with a limited resistance to water and chemicals.

Application method

Apply sparingly using a brush or roller, or by spraying (5-10 % SVALOS Thinner No. 222 or No. 293) at temperatures above 12°C (53.6°F). Ensure good light and ventilation during drying.

Coverage

Determine the exact amount needed by doing a test application. First coat: 1 undiluted litre is sufficient for approximately 15-19 m² (161-204 ft²) i.e. 59ml/m². Second coat: 1 undiluted litre is sufficient for approximately 15-28 m² (161-301 ft²), i.e. 47 ml/m². The total dried thickness of the coating may not exceed 50 µm. Consumption could be considerably less, depending on the condition and absorbency of the surface.

Further information and processing instructions can be found in our technical data sheet.